Last Updated on 2022 年 9 月 11 日 by 小編

Raspberry Pi Compute Module 3+/8GB

Raspberry Pi Compute Module 3+ 簡稱 CM3+，是和 Pi 3 Model B+ 有相同的規格，但具有更彈性的 form factor，適合工業級的應用。

Raspberry Pi Compute Module 3+/8GB 特色

The CM3+/8GB Compute Module contains the guts of a Raspberry Pi 3 Model B+ (the BCM2837 processor and 1GB RAM) as well as an 8GB eMMC Flash device (which is the equivalent of the SD card in the Pi).

• Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.2GHz
• 1GB LPDDR2 SDRAM
• 8GB eMMC Flash memory

This is all integrated onto a small (67.6mm × 31mm) board that fits into a standard DDR2 SODIMM connector. The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi), and designing the Module into a custom system should be relatively straightforward because we’ve put all the tricky bits onto the Module itself.

CM3+/8GB 文件

• Datasheet
• CM3 Schematics
• CMIO Schematics

CM3+/8GB《購買傳送門》

* 填寫表單購買